Nuvation is recognized globally for its specialized skills in Broadcast Video. Nuvation’s design capabilities include video FPGA development, image processing and compression algorithms, communication protocols, RTOS and C-based MCU firmware, chassis design, thermal analysis, signal integrity analysis, and high-reliability design.
- Areas of Expertise:
- Broadcast Video Board-FPGA-DSP-Firmware design
- Routers, Switchers, Video Servers
- Monitoring, Production Control, Terminal equipment
- MPEG-2, MPEG-4 part 2, MPEG-4 part 10 H.264
- Video Scalers, Muxing, Transcoding
- SD-SDI, HD-SDI, DVB-ASI, SMPTE 310M
- DVI, HDMI, HDCP, DisplayPort
- PCIe, GbE, 10GbE, DOCSIS, xDSL T1/E1, DS3/E3
- Backplane design, ATCA/CPCI/VME
- PowerPC and other MCU firmware
- Signal Integrity Analysis
- Mechanical/Thermal design
Project Examples
 |
Video Processing System |
|
|
|
  |
| · |
A multi-output mixing and compositing system designed for switching and windowing applications
|
| · |
System consists of two Input Boards, one Output Board and a Back-plane |
| · |
8 digital & analog video with 480i to 1080p resolution (S-Video, RGB, SDI, DVI-I) input and output
|
| · |
20 SERDES inputs & outputs running up to 6.25 Gbps
|
| · |
Six Altera Stratix II GX per board
|
| · |
24-layer (Input) & 20-layer (Output) boards with tight routing constraints
|
 |
|
|
|
  |
|
|
|
|
  |
| · |
3-Board System capturing Analog & Digital (DVI-I) Video Streams
|
| · |
Applies proprietary processing algorithms and sends out video streams over Gigabit Ethernet |
| · |
Freescale MPC8349 PowerQUICC and Virtex-4 co-processors
|
| · |
Dual Gigabit-Ethernet Interface plus USB 2.0
|
| · |
12 layer PCB optimized for signal integrity and heat dissipation
|
| · |
PCB stays cool while dissipating up to 30 Watts in fanless enclosure!
|
 |
|
|
|
|
 |
|
|
|
|
|
  |
| · |
Highly Parameterized and Run-time Configurable Video Scaler
|
| · |
Separable H and V design with independent polyphase filters
|
| · |
Resolution support from 176x144 to 1920x1080
|
| · |
Scales up or down by an arbitrary P/Q scaling factor
|
 |
|
|
|
|
|
|
Digital Cinema A/V Subsystem |
|
|
|
  |
| · |
Interface board between digital cinema projectors and standard theater audio sub-system.
|
| · |
Projector sends 16 channels of time-multiplexed digital audio input over Cypress HOTLINK II interface
|
| · |
FPGA outputs 16 channels of either AES3/SPDIF digitial audio or 24-bit analog audio
|
| · |
Independent audio delays on each output channel for lip-sync
|
| · |
Supports 48kHz and 98kHz sampling rates
|
| · |
I²C, SPI, I²S, and JTAG interfaces
|
 |
|
|
|