Designing IoT Sensor Networks

By Gwyneth Saldanha | Jul 20, 2017

Learn the secrets of low-power IoT sensor network design with real-world project examples in our whitepaper, written by Engineering Operations Manager, Gwyneth Saldanha. Topics include low-power sleep...

Next Generation FPGAs Address Demands of the Zettabyte Era

By Mark Bingeman | May 23, 2017

Global IP traffic has been significantly increasing over the last few years and is anticipated to continue to increase into the future. Here are a few highlights from Cisco’s VNI June 2016 report.i...

Embedded Software Development: Outsource or In-House?

Feb 6, 2017

Digital Engineering recently interviewed Nuvation Engineering COO Michael Hermann to discuss when to outsource your embedded software development. He explained that the complex products being develope...

Measuring 1MWh in Lemon Batteries

By Nate Wennyk | Oct 22, 2016

Helping the average person understand the energy stored by a 1MWh energy storage system can sometime involve making some pretty interesting comparisons. Where more commonly one might see something lik...

Putting Quality Products on the Shelves: Reliability DVT

By Neil Miller | Oct 11, 2016

Earlier in this series we discussed why design validation testing (DVT) is important and how environmental DVT is performed. Now we’ll take a look at Mechanical and Reliability DVT, and how electron...

Nuvation Quality Management: Design Project Post-Mortems

By Gwyneth Saldanha | Sep 25, 2016

A post-mortem sounds like it would be kind of morbid and depressing, but at Nuvation it’s actually a really positive thing. A Project Post-Mortem (PPM) is one of the tools we use to continuously imp...

A Closer Look at PCB Traces

By Pi Zhang, Karl Morant | Jul 13, 2016

A frequently asked question during Nuvation's Printed Circuit Board (PCB) layout review meetings is, “Are 50-ohm traces being used for the digital signals in this PCB layout?” Often the answer to ...

When to Outsource Your Electronic Design

By Joseph Xavier | Jan 1, 2016

How do you know when to outsource your electronic design? Currently, more than half of electronic product companies in North America outsource design, and the number is growing.1 The decision to outso...

Designing a Health Monitoring Device

By Gwyneth Saldanha | Dec 11, 2015

A Nuvation Engineering client in the tele-health industry was seeking assistance upgrading a health monitoring device used by patients who are managing their care at home. The device collects data fro...

Best Practices for Internet of Things (IoT) Designs

By Gwyneth Saldanha | Nov 13, 2015

For Internet of Things (IoT) sensor networks, Nuvation offers a comprehensive suite of engineering services ranging from architecture design to product development and manufacturing. When designing th...